Incredible DIY

  • Home
Home / Archive for August 2013

Ultrasonic distance measurement using HC-SR04 ultrasonic module + Arduino Pro

බුද්ධික - 2:40 PM 1 Edit
Ultrasonic sensors (Ping sensors) are widely used in distance measurement as they are cheap and has a quite good accuracy. I got this cheap ...

Computer controlled automated guided vehicles (AGV) using Parellel port interfacing

බුද්ධික - 11:24 PM 1 Edit
As we built a relay board to interface with " parallel port " in my earlier post. Today I'm going to talk about the control s...

RS-485 Communication testing with MAX485

බුද්ධික - 10:47 PM 3 Edit
As we know about RS-232 communication protocol, I'm going to try RS-485 communication between two nodes. RS-485 can support multiple s...
Subscribe to: Posts ( Atom )

Twitter

Follow @incrediblediy

Follow by Email

Followers

Popular Posts

  • Simple 3.3V–5V level shifter
    In present day electronic we find many sensors or modules working in 3.3V logic levels.In other terms LVTTL devices (Low-voltage TTL). But e...
  • RS-485 Communication testing with MAX485
    As we know about RS-232 communication protocol, I'm going to try RS-485 communication between two nodes. RS-485 can support multiple s...
  • USB to UART Convertors (PL2303 & CP2102)
    If you are working with any UART stuff with micro controllers,you may have to debug them or send/receive data with a PC. In good old days,al...
  • Arduino based Webserver (ATMEGA328 + ENC28j60)
    Updated on 09-01-2017 to correct issue with MAC address: (Identifed by Julien as per in the comment section) Replaced : static byte mymac[...
  • Modifying a cheap CP2102 USB to UART board to get a DTR pin (for Arduino programming)
    I got this CP2102 USB to UART board from ebay recently as showed in my previous post . I got this mostly for Arduino progeamming using the A...
  • Building Real Time Clock (RTC) module based on DS1307 for Arduino
    In this post I’m going to build a Real Time Clock (RTC) module based on popular DS1307 RTC chip for using with Arduino or any other micro-co...
  • PS/2 Keyboard Interface for PIC uC (PIC16F887)
    We need to get various kinds of inputs for our microcontroller circuit. If we need to use key board to input data,we can either use simple b...
  • Homemade USB PIC Programmer - PICKIT2 Lite
    I was using various programmers for PIC programming.JDM was one of that,which I used for a long time but it's a Serial port programmer.I...
  • Building an Arduino Pro / Arduino UNO (with TechDuino)
    I wanted to build a 3.3V microcontroller development system for a long time. This is because most newer sensors and other  devices are worki...
  • Variable frequency PWM using MikroC + PIC16F887
    When I was doing a project on a robot,I found out that the MikroC PWM library doesn’t support variable frequency values for the PWM frequenc...
Powered by Blogger.

Archive

  • ►  2017 (1)
    • ►  October (1)
  • ►  2014 (5)
    • ►  September (1)
    • ►  March (1)
    • ►  January (3)
  • ▼  2013 (34)
    • ▼  August (3)
      • Ultrasonic distance measurement using HC-SR04 ultr...
      • Computer controlled automated guided vehicles (AGV...
      • RS-485 Communication testing with MAX485
    • ►  July (1)
    • ►  June (5)
    • ►  April (5)
    • ►  March (11)
    • ►  February (9)
  • ►  2012 (3)
    • ►  April (1)
    • ►  March (2)
  • ►  2011 (5)
    • ►  July (2)
    • ►  June (3)
Copyright © 2015 Incredible DIY
Distributed By Gooyaabi Templates